ELECTRONICS MECHANIC job in Bury St Edmunds at United States Air Force In The UK

ELECTRONICS MECHANIC

Company: United States Air Force in the UK

Location: Bury Saint Edmunds UK

Date Posted:Apr 26, 2018

 VACANCY ANNOUNCEMENT NUMBER:100 OSS VA18 RPA400429 MILOPENING DATE:26 APR 2018CLOSING DATE:10 MAY 2018POSITION TITLE:Electronics MechanicsPAY: £12.21/£12.79/£13.38Recruitment Incentive of £234.98 is payable bi-weekly over four years (104 pay periods), subject to conditions.PAY PLAN:W-2604-06CATEGORYFull Time 39 hours per weekLOCATION/ACTIVITY:RAF MildenhallBENEFITS:Benefits include paid annual and sick leave and opportunity to join Group Stakeholder Pension Scheme.  For additional information contact the LNDH team on 01638 544955DESCRIPTION: The incumbent is responsible for the general maintenance and maintenance training of Airfield Systems communications equipment at RAF Mildenhall, UK and at RAF Fairford, UK. They will install, modify, overhaul, maintain, troubleshoot, and repair electronics equipment of moderate complexity or a system of limited complexity. Perform unscheduled maintenance and preventative maintenance inspections on Tactical Air Navigation System (TACAN), Instrument Landing System (ILS), Air Terminal Information System (ATIS), Very High Frequency (VHF)/Ultra High Frequency (UHF) amplitude modulated transmitters, receivers/transceivers and VHF frequency modulated transceivers. Assist in the maintenance of radio/telephone control communications consoles, Digital Audio Legal Recorder (DALR) and Enhanced Terminal Voice Switch (ETVS) as directed by appropriate regulations, directives and local operating instructions. Set up and operate software controlled automatic test equipment to test and troubleshoot various components and assemblies of electronic equipment such as radio/radar receivers and transmitters, modulators, electronic analog and digital computer components, modules which contain integrated circuits, and printed circuit boards and assemblies. Perform the duties of a work center trainer and monitor. All work must be recorded and tracked in the Integrated Maintenance Data System to maintain records and to provide reports to management.GENERAL EXPERIENCE:  Please provide detailed work experience as it relates to the required competencies listed below, as this will be used to determine your qualification for this position.1.  Knowledge of and experience in the application of electrical and electronic theory; and operating electronic principles such as microminiaturized digital and solid state integrated circuits, transistors, diodes, tube circuits, antennas, signal transmission, oscillation, and amplification.2.  Knowledge of and experience enforcing safety regulations, practices, and procedures.3.  Skill in the use of electronic and conventional  test equipment such as computer controlled automated test equipment (ATE), oscilloscopes, pulse and signal generators, distortion and waveform analyzers, digital data generators, digital voltmeters, frequency generators, and special test panels; and the use of a variety of hand tools such as screwdrivers, drills, wrenches, soldering irons, and microsoldering units.4.  Ability to troubleshoot and repair malfunctions where circuit theory must be used to understand the operation of individual circuits and the interaction of other circuits to create a malfunction; and perform functional tests on items to determine the extent of repair required, make repairs, and replace defective components and parts. 5.  Ability to assist engineers in developing, debugging, or modifying diagnostic programs by identifying and investigating apparent contradictions between test specifications or test requirement documents and test programs.6.  Ability to use computer terminals to maintain records and document actions. Experience with computers, familiarity with Windows and current Windows Operating Systems, and Microsoft application software.OTHER SIGNIFICANT FACTS:  1. A pre-employment physical is required for this position. Physical effort is moderate to heavy.  Associated duties require stooping, bending, and climbing.Lifts and carries objects weighing up to 40 pounds and heavier objects with assistance.  2. Must hold a minimum category ‘B’ driver’s license, and be able to obtain/maintain a Government Driving license and Flight line driving license.3. Will serve as the element’s Backup Power Monitor – Ensure all work centre personnel receive generator operator training from the Civil Engineer Power Production work center in accordance with appropriate air force instructions.  Document all appropriate training in the relevant programs. 4. Will serve as theWork Center Electrostatic Discharge (ESD) Monitor – Ensure all squadron work centers participating in the ESD Prevention Program (ESDPP) have primary and alternate monitors assigned by appointment letter to the Unit ESD Monitor.  Accomplish an annual ESD survey on each work centre and provide a copy of the results to the mission support quality control office and unit commander.  Provide assistance and information on ESD matters.  Apply ESD protective measures and ensure work centrepersonnel comply with procedures.5. May be required to obtain an appropriate clearance to perform the work in sensitive areas.6. May be required to perform duties in a Temporary Duty (alternate work site) (TDY) status.7. On call duty or rotating shifts may be required to provide support or in emergency situations. MEDICAL/SECURITY REQUIREMENTS: Security clearance  ImmunizationsPre-employment medical FOOD HANDLERSDefence Barring Service (DBS ) certificateEDUCATION/TRAINING:  1. Must hold one of the following: Ordinary National Certificate (ONC) in an electronic engineering discipline; City in Guild qualifications in an electronic engineering discipline; Minimum of four years of radio engineering maintenance experience2. Desirable:Higher National Certificate in an electronic engineering discipline; Experience in personal computer (PC) maintenance; Qualified ATC Radio or Navigational Aids Certifier experience.HOURS OF DUTY:Monday – Friday 0800-1630 hours. May be required to work rotating shifts or provide on-call support for out of hour maintenance.  Subject to call back to meet emergency situations.WHO CAN APPLY: Citizens of the U.K., Nationals of European Community (EC) Countries, and Commonwealth Citizens, other Foreign Nationals, and Stateless persons provided no restrictions have been imposed as a condition of continued residency in the UK. Applicants will need to submit necessary documents with the application form to demonstrate that they are eligible to work in the United Kingdom.  This position may have certain restrictions to US citizensdue to the SOFA agreement. For additional information contact the LNDH team on 01638 544955  How to apply: Interested candidates must complete an application form obtainable from the Civilian Personnel Webpage:   All applications, with relevant attachments and/or CV/Resume must be submitted via email: Proof of identification in the form of a photo ID will be required, for example a Driving license or current passport. All successful applicants will require a security clearance.  Please note Pre-appointment Security Clearance requirements may delay start date.EQUAL OPPORTUNITY EMPLOYER:There will be no discrimination in employment practices based on gender, age, marital status, disability, race, nationality, religion or beliefs, sexual orientation, being or not being a member of a trade union.    View full job description
JobCentre Plus 9 months ago
Need more jobs?

Submit your CV so employees can contact you directly for more!

ELECTRONICS MECHANIC jobs in Bury St Edmunds

Job location:

Bury St Edmunds Map of ELECTRONICS MECHANIC job in Bury St Edmunds at United States Air Force In The UK

JobHits is one of the fastest growing job search engines in the UK. Everyday 30,000+ new jobs, find your ideal job from vacancies at major job boards and companies� careers websites in the UK.

© 2013 - JobHits Pty Ltd